View source

During a transfer you may run into the following error:

 Connecting to Remote Server Failed: Unable to connect to IP.ADDRESS:22: Bad file descriptor

This error is shown when the server that the copy is running on is unable to connect to the remote SSH server. The most common error is due to a firewall blocking outgoing port 22 on the server. Open up the firewall to allow this and the transfer will go through.

==Apf Firewall==
On the APF firewall add port 22 to '''EG_TCP_CPORTS''' if you have '''EGF''' set to 1. Then restart apf with '''apf -r'''

[[Category:Transfers]]